SETTING UP A REMOTE CONTROL FOR TV TV
**NOTE: If you have verified that your TV is on the correct channel, and you’re cable isn’t working, then press the “STB” button once then the “Power” button one time. Then, press the “STB” button on your remote to return to regular channel viewing. To change the channel that is programmed into your television, press the “TV” button on your remote, and then the correct channel associated with that remote (1=10, 2=23 and 3=39). For Remote 2, the television must be tuned to channel 23, and for Remote 3, the television must be tuned to channel 39. Each remote also has a channel that the associated television must be programmed to.įor Remote 1, the television must be tuned to channel 10. Each remote is assigned to a television, and will not work with any other television other than the one it is assigned. Your Entone remotes are labeled 1, 2 and 3 on the battery cover. If you are experiencing trouble with your Entone Remote control (you can’t toggle channels, AND/OR when you change channels on one TV and another TV changes, also), please see below. Remote Does Not Work/Channels Change On Other TVs
SETTING UP A REMOTE CONTROL FOR TV CODE
If all code sets of that device are exhausted in the search and the “OK” is not pressed, the selected device key will blink 7 times and the search mode will be terminated.If the device turns off, a working code has been found.The device key will be on and blink every 5 seconds while in the device scan mode. In this search mode, the remote control will send IR codes from the library in 5 second intervals.Press either “CHANNEL UP” key or “CHANNEL DOWN” key to do device auto-scan.Press the “POWER” key once and aim your new remote at the device.Then press and hold “SETUP” until the device key blinks twice, and then release “SETUP.” Power on the device and on the remote control, press the desired device key (TV,STS, AUX) once.To search for the codes of your other devices, repeat the previous steps, but substitute the appropriate key (“AUD,” “DVD” or “AUX”) for the device you are looking for.Ĭongratulations! You’ve programmed your remote control!.Press the RCU SETUP once to lock-in the code.To control the Volume of your TV, press and release the SET button and Volume Up button at the. (note: In the search mode, the TV button will blink while searching for the correct TV code.) The remote controls the Volume of Set Top box by default. Press and release the “CH+” (channel UP) button continuously, then stop when your TV turns off.Aim the remote control at the TV and press the POWER button once.Then press and hold the “RCU SETUP” button until the “TV” button blinks twice.
Searching for your device code? If your home entertainment device does not respond to your remote, try searching for your product codes.
0 kommentar(er)
